FIGHTS CONDENSATION, MOISTURE AND STALE SMELLS IN LIVING SPACES. OPTIMAL MOISTURE ABSORPTION THANKS TO UNIQUE AIR CIRCULATION SYSTEM.
|Container||weiß, 500 g|
|Container||anthrazit. 500 g|
EXTREMELY SUITABLE FOR USE IN THE LIVING ROOM, BEDROOM, BATHROOM, TOILET, ETC.
Use and Handling Instructions
500 g works for approximately 3 months in a room up to approximately 40 m³ and absorbs approximately 0.6 litres of water, depending on the temperature, air humidity and size of room.
Directions for use: Initial use and refilling
1. Lift the cap on the device.
2. Carefully cut open the package containing the tab.
3. Insert the tab without the packaging into the special holder of the device.
4. Replace the cap on the device.
5. When the tab has dissolved completely, the device can easily be emptied.
Emptying 1. Rotate the cap on the device (anticlockwise) and lift it away from the reservoir.
2. Lay the cap on a surface that can become wet, e.g. newspaper/sink
3. Empty the reservoir into a sink or toilet using the spout, then rinse thoroughly with water.
4. Screw the cap back on the reservoir until it ‘clicks’ and insert a new tab.
Stains/Residue: Spilt fluid can cause surface marks. If fluid is spilt, it should be cleaned immediately using large volumes of water and dabbed repeatedly until dry. Avoid contact with leather, wood, stone and metal, as these materials can be affected negatively.
Advice: Always position the Moisture Absorber Ambiance on a flat and stable surface.
Points of attention: When refilling, use only the Moisture Absorber 500 g tabs or the Moisture Absorber 450 g/500 g refill bag. Do not refill using loose crystals.